
Online course · Tools, machines and substances
This is a short online awareness course on the Provision and Use of Work Equipment Regulations 1998. It takes about 34 minutes and ends in a certificate of completion.
PUWER is one of the courses in two packs, each priced per person.
Most of what a tree or grounds team picks up in a day counts as work equipment under PUWER. That takes in the chipper and its infeed, the stump grinder, chainsaws, hedge trimmers, ride-on mowers and the hand tools in the van. HSE's summary of the Regulations says equipment has to be suitable for its intended use, kept in a safe condition and used only by people who have had adequate information, instruction and training. On site that comes down to guards being in place, stop controls working, checks being done before the machine is started and defects being reported before it goes out again.
Free toolbox talk for team leaders to read out on site in about five minutes: Wood chipper safety: the infeed, the stop bar and blockages
The course is made up of video lessons and it checks your knowledge of the subject.
You can take it on whichever of these you have to hand.
When you finish there is a certificate of completion to download.
Regulation 9 of the Provision and Use of Work Equipment Regulations 1998 requires every employer to ensure that all persons who use work equipment have received adequate training for purposes of health and safety, including training in the methods which may be adopted when using the equipment, any risks its use may entail and the precautions to be taken. The same duty covers employees who supervise or manage the use of work equipment.
Read more in our guide: What does PUWER stand for?
This is an awareness course about the Regulations. It does not teach anyone to operate or inspect a particular machine, and it does not replace practical, task-specific training by the employer on the equipment in use.
Regulation 9 gives no fixed renewal period: HSE says training may need to be refreshed at suitable intervals, and your client or scheme may ask for a set period.
The course material runs for about 34 minutes and is split into six sections. They cover what the Regulations are, the equipment they apply to, the duties on employers and employees, common hazards, guarding and inspection.
Regulation 9 of PUWER requires employers to make sure that everyone who uses work equipment has had adequate training. The same applies to employees who supervise or manage its use. This course suits operatives, supervisors and managers who need to know what the Regulations expect of them.
No, it covers the knowledge side only. HSE says adequate training depends on the job, the equipment and the worker's existing competence, so practical training on the machines in use is still needed. For chainsaw work on or in a tree, HSE generally expects a relevant certificate of competence or national competence award, unless the worker is in supervised training.
Regulation 9 gives no fixed period. HSE says training may need to be refreshed at suitable intervals, and that new equipment or a change in the system of work may call for more. Your client or scheme may ask for a set period. CHAS guidance published in 2019 looks for work equipment training to be refreshed every three years.
Yes. HSE says PUWER places duties on people and companies who own, operate or have control over work equipment, and that work equipment includes equipment which employees provide for their own use at work. A saw or hand tool that an employee brings in to use on the job still counts.
It is a certificate of completion for an awareness course on the Regulations. Each certificate carries a unique code that can be checked on the learning platform to confirm it is genuine. It is not a qualification or a licence to operate any machine, and it does not show that the holder has been trained to use or inspect particular equipment. It can sit in the training file next to the employer's own record of practical training.
PUWER covers all work equipment. LOLER adds further duties for equipment used to lift loads, such as thorough examination, and HSE's overview of LOLER explains that both usually apply to lifting equipment.
£30 inc VAT for one person (£25 + VAT). It is also in two packs: Grounds Team Essentials, five courses for £99 inc VAT (£82.50 + VAT) per person; Equipment Safety, four courses for £79 inc VAT (£65.83 + VAT) per person. Five or more people can go on one team order. We send a secure card payment link and set them up as soon as it is paid.
More online courses
Tools, machines and substances
About 28 minutes
£30 inc VAT£25 + VAT
View courseTools, machines and substances
About 1 hour 40 minutes
£36 inc VAT£30 + VAT
View courseTools, machines and substances
About 40 minutes
£30 inc VAT£25 + VAT
View courseAlready bought a course? Online courses login
PUWER£30 inc VAT £25 + VAT
Buy this courseCareers
Climbing, grounds maintenance and utility work.Climbing, grounds and utility work.
Arboricultural Association Approved Contractor.