Law and guidance
No law in Great Britain sets how often a chainsaw operator or climber must do refresher training. The law requires adequate training and, for employers, training repeated periodically where appropriate. The two to three and five year figures come from guidance, not from law.
In brief
No Act or regulation in Great Britain sets a refresher interval or gives a certificate of competence an end date. The usual two to three and five year figures come from HSE guidance, though clients may still ask for them.
No Act or regulation in Great Britain says how often a tree worker must do refresher training, and none gives a certificate of competence an end date. The usual figures, every two to three years for occasional chainsaw users and every five years for full-time users, come from HSE guidance. Clients may still ask for them: City & Guilds notes that anyone commissioning work may want evidence of training within those intervals before work starts on a site.
What this page covers
The law in Great Britain (England, Scotland and Wales), not Northern Ireland, as read in October 2026. It is a plain guide, not legal advice.
The table gives each source's status. Law must be followed and ACOP text has special legal status; guidance and industry codes, where the HSE and FISA refresher intervals and the AA's triggers come from, are not compulsory unless they say so.
The Status column separates three kinds of document. Law must be followed. ACOP text, printed in bold in an HSE code, has special legal status: if you are prosecuted and did not follow it, the court treats the breach as proven unless you show you complied in another, equally effective way. Guidance and industry codes, the source of the HSE and FISA refresher intervals and the AA's triggers, are not compulsory unless they say so.
| Source | What it says | Status |
|---|---|---|
| Health and Safety at Work etc. Act 1974, section 2(2)(c) | Employers must provide information, instruction, training and supervision, so far as is reasonably practicable. | Required: law |
| 1974 Act, section 9 | Employers may not charge employees for anything done or provided to meet a specific legal health and safety requirement. | Required: law (protects employees) |
| Management of Health and Safety at Work Regulations 1999, regulation 13 | Training on recruitment and when risks change, repeated periodically where appropriate and given in working hours. No interval. | Required: law (employers) |
| PUWER 1998, regulation 9 | Adequate training for everyone who uses work equipment and for employees who supervise its use. | Required: law |
| L22, paragraph 133 | Chainsaw work on or in a tree: appropriate training and a relevant certificate of competence or national qualification, unless in training and adequately supervised. | ACOP text: special legal status |
| L22, paragraph 124 | Refreshers when necessary, because unused skills decline. No interval. | Recommended: HSE guidance |
| Work at Height Regulations 2005, regulations 4 and 5 | Plan for emergencies and rescue. Only competent people, or supervised trainees, take part. | Required: law |
| Work at Height Regulations 2005, Schedule 5 | Rope and harness only if the user and enough available people are trained for the job, including rescue procedures. | Required: law |
| LOLER 1998, regulation 9(3) | Equipment for lifting people and lifting accessories, where exposed to conditions that cause deterioration likely to lead to danger: thorough examination at least every 6 months, unless an examination scheme sets the interval. | Required: law (kit, not training) |
| HSE INDG317, Chainsaws at work | Every two to three years for occasional users and every five years for full-time users. | Recommended: HSE guidance |
| FISA 805, Training and certification | At least every five years for most machinery work, chainsaw and aerial tree work included. | Recommended: industry guidance |
| AA Tree Work at Height code (2020) | When work, kit or risks change, when skills go unused and to keep aerial rescue current. | Recommended: industry code |
| Great Oaks | A City & Guilds certificate of competence does not expire. A refresher about every five years; an upskill in the same skill counts. | Recommended: our rule |
The 1974 Act and PUWER require employers to give training, and the Management Regulations require it to be repeated periodically where appropriate and given in working hours, but leave the timing to the employer. Section 9 stops employers charging employees for it.
Three pieces of law set the frame for training, and section 9 of the 1974 Act decides who pays.
There is no chainsaw licence in law. HSE's L22 expects appropriate training and a relevant certificate of competence or national qualification for chainsaw work on or in a tree, unless in training and adequately supervised, but sets no end date.
There is no chainsaw licence in law, as our guide to the chainsaw licence explains: what people call a licence or a ticket is a certificate of competence. The expectation to hold one at work comes from L22, HSE's code for PUWER.
Paragraph 133 of L22 is ACOP text. Before using a chainsaw on or in a tree, a worker should have had appropriate training and hold a relevant certificate of competence or national qualification, unless they are in training and adequately supervised. A narrow agricultural exception for long-standing farm users does not reach tree surgeons or contractors.
The guidance adds that anyone using a chainsaw at work, for any task, must have had adequate training. For professional chainsaw operators in forestry and arboriculture, paragraph 137 reports the industry recommendation of a certificate of competence or nationally recognised qualification, assessed independently of the training, for 'high risk' work, cross-cutting included. None of this sets an end date, as our page on whether a chainsaw licence expires explains.
By law, rope and harness may be used only if the climber and enough other available people have had adequate training for the job, including rescue procedures. No regulation, nor any guidance we checked, fixes how often to practise rescue.
Under the Work at Height Regulations 2005, a personal fall protection system such as a rope and harness may be used only if the user and a sufficient number of available people have had adequate training specific to the job, including rescue procedures (Schedule 5, Part 1, paragraph 1(b)). Planning must cover emergencies and rescue (regulation 4). Only competent people, or trainees supervised by a competent person, may take part (regulation 5).
So rescue training is a legal matter for the rest of the team as well as the climber. HSE's aerial work guidance says at least two people must be present during all aerial work, with one of the ground team available, competent and equipped to do an aerial rescue without delay. No regulation, and none of the guidance we checked, fixes how often to practise rescue. See climbing and aerial rescue refreshers.
LOLER's examination duties cover kit such as climbing ropes, harnesses and rigging slings, not training. Where exposed to conditions causing dangerous deterioration, such kit needs thorough examination at least every 6 months, unless an examination scheme sets the interval.
HSE's guidance gives climbing ropes and an arborist's harness as examples of kit covered by the Lifting Operations and Lifting Equipment Regulations 1998 (LOLER). LOLER's examination duties are about kit rather than training, but they sit alongside any climbing refresher. On a Great Oaks climbing refresher, bring your own climbing kit if you have it, with an in-date LOLER thorough examination record; if you have none, ask us.
Regulation 9(3) requires every employer to make sure that equipment for lifting people and lifting accessories, where exposed to conditions that cause deterioration likely to lead to danger, is thoroughly examined by a competent person at least every 6 months, unless an examination scheme drawn up by a competent person sets the interval. Rigging slings, ropes and connectors used as lifting accessories are in the same 6 month group. See our LOLER inspections page.
HSE's L22 calls for refreshers when necessary; the years come from HSE's INDG317 and FISA 805, while the AA code gives triggers. Great Oaks recommends about every five years and counts an upskill in the same skill as the refresher.
No interval set
Every 2 to 3 years
Every 5 years
At least every 5 years
About every 5 years
Guidance, not law, sets every interval shown. This covers Great Britain (England, Scotland and Wales), not Northern Ireland.
L22 paragraph 124 says: "You will need to provide refresher training when necessary." The years come from INDG317 (January 2013) and FISA 805 (August 2025). The Arboricultural Association's Tree Work at Height code gives triggers instead, and with FISA calls for regular rescue practice. Great Oaks recommends a refresher about every five years, the wood chipper included, and counts an upskill in the same skill, such as passing felling medium trees after felling small trees, as the refresher. See how often to do a refresher.
Why some sites say "required"
A 2021 City & Guilds pack described chainsaw refreshers as required under PUWER, and that wording is still copied. City & Guilds' current handbook for the 0041-01 CPD module (August 2025) says recommended. PUWER itself sets no interval.
The Management Regulations' training duty and section 9 cover employers and employees only. If your work is on a set list, forestry included, or may put others at risk, PUWER requires you to be adequately trained for your equipment.
Great Oaks Training runs the one-day refresher, signed off by our instructor; a City & Guilds CPD assessment is optional, for an extra fee. The Great Oaks Assessment Centre is a City & Guilds approved assessment centre offering CPD units.
Great Oaks Training: refresher day
Great Oaks Assessment Centre
Past Great Oaks learners get an email when a refresher is recommended and can stop those emails at any time. See refresher training for the full offer.
No law sets a refresher timetable or interval. For employers, regulation 13(3) of the Management Regulations requires training to be repeated periodically where appropriate, which leaves the timing to the employer. It places no such duty on the self-employed. The two to three and five year figures are HSE's suggestions in INDG317. FISA recommends at least every five years and Great Oaks about every five years.
No. Neither the law nor paragraph 133 of L22 sets an end date for a certificate of competence, and the City & Guilds handbook for the chainsaw maintenance and cross-cutting certificate gives no validity period. Great Oaks' own rule is that a City & Guilds certificate of competence does not expire. What fades is skill that goes unused, which is what a refresher is for.
Not if you are an employee and it is health and safety training your employer must provide. Section 9 of the 1974 Act stops employers charging employees for anything done or provided to meet a specific legal health and safety requirement. HSE's tree work guidance says employees must not have to pay for this training, refreshers included, and the Management Regulations require it in working hours. None of this covers the self-employed.
No. The Industry Code of Practice for Arboriculture: Tree Work at Height (Edition 2, May 2020) is endorsed by HSE, and HSE's tree climbing guidance refers readers to it, but it is an industry code of good practice. The code itself says it is not wholly definitive and that departing from it needs a robust risk assessment.
Great Oaks Training
Refresher intervals
Refresher training
Refresher training
For employers and clients
Refresher training
This page explains the law and guidance in plain English. It is not legal advice. It covers Great Britain. Contains public sector information licensed under the Open Government Licence v3.0.
A one-day refresher at Freshfield Farm, Freckleton, or on your own site where it is suitable, with the date arranged when you book. Price on request. Ring the training line on 01772 369694 or email training@greatoakstreeservices.co.uk.
Careers
Climbing, grounds maintenance and utility work.Climbing, grounds and utility work.
Arboricultural Association Approved Contractor.